Sanitary Fruit Jam Tomato Paste Electric Heating Cooking Mixer Gas Heating Jacket Kettle

• Usage: Candy, Chocolate, Vegetables, Ptatoes, Tomatoes
• Power Source: Electric
• Timing Device: Without Timing Device
• Type: Mixer
• Voltage: 220V/380V/415V
• Customized: Customized
• Model NO.: HD
• Material: SS304/SS316(L)
• Power: 1.5-18.5kw
• Voulme: 50-1000L
• Motor: Dometic/ABB/Siemens
• Heating: Electric/Steam/Gas
• Speed: 23rpm/35rpm
• Product Type: Mixer, Tilting, Vertical
• Working Pressure: <0.2MPa
• Heating Area: 0.4-1.9m2
• Voltage Range: 220V-415V, 50/60Hz, 3phase
• Transport Package: Plywood Case
• Specification: customized
• Trademark: HUNDOM
• Origin: Guangzhou
• HS Code: 8419810000
• Production Capacity: 100 Set/Sets Per Month

Product Description

Structure

Jacketed kettle can use steam with certain pressure as the heat source, or electric heating. The electric heating uses 220V/380V/415V(customized) power as the heat source. The jacket is equipped with electric heating rod, thermocouple and heat transfer oil (self-made), which can reach 200 degrees. It is controlled by an electric control box and has a built-in temperature control system. The equipment has the advantages of large heating area, uniform heating, short boiling time and easy control of heating temperature.

Mirror polishing, electric control box and bracket are made of stainless steel SS304;

Capacity, jacket working pressure, motor power, heating power and mixer structure can be customized.

Wall scraper: using whole piece of PTFE material, easy to clean and replace, less dead angle, reduce material sticking to the wall.

Semicircle design of discharge outlet: it is convenient to put materials upside down without dead angle.

Rotating device: the cast iron integral worm gear is adopted, which meets the safety standard (SUS 304 hygienic food grade).

Oil filling inlet: 102 pipe diameter, convenient and not easy to flow out.

Mixing device:
1. The reducer is made of Taiwan brand;
2. Detachable frame;
3. Stainless steel bearing;
4. High temperature resistant sealing ring (preventing steam from entering the bearing and reducer);
5. No positioning at the bottom of shaft (reducing residue).

Electric control box:
1. Temperature controller to control temperature
2. Split PT100 thermocouple
3. Electrical components
4. Stainless steel 304 box.

Stainless steel small oil cup: heat transfer oil inlet, when the jacket kettle tilts and rotates, the oil in the oil cup will not leak out.

Electric heating rod: it is easy to disassemble with threaded connection, and the gasket is made of Teflon material, which can withstand 300 degrees without leakage.

Tilting support: stainless steel 304 material is used as a whole.

Application
The stainless steel jacket kettle can be applied to a wide variety of foods processing, such as candy, medicine, dairy, liquor, cake, candied fruit, drink, canned goods, sauced meat etc.It also can be used in making soup, cooking stir-fry, stewing meat, cooking porridge and so on, and it is a wonderful equipment to improve quality, reduce time and improve working conditions during foods processing.

Optional Type of Jacket Kettle
Gas Jacket Kettle
you can use natural gas, LGP and any other kind of heating medium that you have.
To natural gas, liquefied petroleum gas as a heat source, full combustion, smoke-free dust-free,a small amount of carbon deposition, no environmental pollution.The use of powerful energy- saving burners, fire fierce, thermal efficiency than similar products increased by 25%, air consumption than similar products to reduce about 20%.
Steam Jacket kettle
with Dimple jacket inside the walls for steam inject and heating. It takes the steam as thermal source. The inner surface contacted with the product are all SUS304 Or SUS316.
Electrical Jacket Kettle
Compared with steam heating, the heating temperature of the electrical jacket kettle is higher than steam jacket kettle, Which can shorten the cooking time.

Technical Parameters

Model	Capacity/ diameter*height	Type	Working Pressure(Mpa)	Speed(rpm)	Inlet/outlet diameter	Motor power/heating power
HD-50	50Liters/  60*45cm	Vertical/tilting/mixing	0.3	36	1/2"	0.75kw/8kw
HD-100	100Liters/  70*50cm	Vertical/tilting/mixing	0.3	36	3/4"	0.75kw/12kw
HD-200	200Liters/  80*55cm	Vertical/tilting/mixing	0.3	36	3/4"	1.5kw/15kw
HD-300	300Liters/  90*65cm	Vertical/tilting/mixing	0.3	36	3/4"	1.5kw/15kw
HD-400	400Liters/  100*75cm	Vertical/tilting/mixing	0.3	36	3/4"	1.5kw/18kw
HD-500	500Liters/  110*85cm	Vertical/tilting/mixing	0.3	23	1"	2.2kw/18kw
HD-600	600Liters/  120*95cm	Vertical/tilting/mixing	0.3	23	1"	2.2kw/24kw
HD-1000	1000Liters/1400*115cm	Vertical/tilting/mixing	0.3	23	1"	3.7kw/30kw

Product Show





About HUNDOM
Guangzhou HUNDOM Machinery Equipment Technology Co., Ltd. was founded in 2003, is a high-tech enterprise integrating R&D, production and sales. It has more than 18 years of mechanical manufacturing experience. Main production: homogeneous emulsion tank, high-speed mixing tank, heating mixing tank, in-line high shear pump, colloid mill, conveying pump, filters etc. HUNDOM has mature technology and high quality products to meet various requirements in the field of food, pharmaceutical and chemical industry.

With a high level of R&D system, HUNDOM constantly strives to improve product quality and technical standards, constantly develops product functions to enhance product life and adherence to precision manufacturing. The ex-factory products need to undergo strict quality inspection procedures to ensure that they meet the quality requirements and inspection standards of all walks of life. The mature technology and rigorous attitude are the guarantee of HUNDOM Technology's product quality, to think what the customer thinks, and pleased what the customer likes. Provide a reasonable and effective equipment solution. Please believe us: there are high quality products, mature facilities and engineering teams waiting for you. Let's discuss, make decisions and make progress together with you.